Fill in your phone number below and
we will contact you as soon as we can.
Buttons for industrial environment
Customized button panel to streamline your alarm handling. Clearly communicate what type of mistake has occurred in order to call for the correct type of help from start and document the cause for continuous improvement.
Enter error code to call for the correct type of help immediately. Document what caused the error as a basis for working with continuous improvements (Kaizen, 改善).
Customise your own button panel by selecting the labels and symbols printed on the buttons that suit your production.
Connect instantly to your existing BPS system via CAN or LP304 if you are using a different bus communication standard. Power directly through the bus or a separate AC adapter. Install and relocate easily with our industry-standard high-speed connections.
Number of buttons
10
Contact
1 x M12, 5-poles, pin, A-coded
1 x M12, 5-poles, socket, A-coded
Data transmission
125 kbit/s
Input voltage
20 – 32 VDC
CE
EN 61000-6-2 and EN 61000-6-4
Dimensions
B 70 x H 180 x D 20 mm
Weight
400 g
Mounting
Wall mounted, 2 x M6
Power consumption
130 mA
IP Code
IP51
Temperature interval
0 – 50 °C
Humidity
0 – 95% non-condensing
To reduce waste in a production environment, Andon is a proven method that easily can be implemented. Focus is to keep the operator value adding during assembly. Any disturbance or abnormal situation is taken care of by pushing the Andon button or by pulling an Andon cord. The alarm will be visualised on displays, lamps and even sounded off to raise the attention of the Team Leader or an Andon Coach. The support person will take care of the problem and register a fault code for the disturbance. Binar has the products to make this smooth and easy. With the ten-button box LP220 the fault code will be registered with a push.. Improvement groups may easily read the result for further analysis and to take action for improvements.
